8:00 AM - 8:00 PM

How To Fix And Repair The Most Common Heating Problems

Homeowners can encounter occasional issues with their heating system, which at times, may be hard to understand. The good news is, many issues with central heating systems are simple. In the event that the issues are a little more complicated, there are reputable plumbing mechanics and heating engineers who can provide a solution to your problem. Contact Climate & Energy Solutions for quick and effective solutions when you find yourself in a difficult scenario.

Common Heating System Issues And How To Fix Them

  • The Thermostat’s Display Is Blank, And It Is Not Turning On

The thermostat is the main component that controls the heating system in your home. If it doesn’t turn on, it won’t be able to tell your furnace or heat pump when to turn on. When the wire within a thermostat becomes dislodged, it may affect the screen display.

After removing the faceplate from your thermostat, you should examine it for any loose connections or wires that appear in the wrong positions. Verify that the thermostat is properly installed, activated, and set to the desired temperature.

  • Problems With Either The Ignition Control Or The Pilot Light

In most circumstances, a modern heating system’s ignition technique will be either a hot surface ignition or an intermittent pilot. The absence of constant or continuous heat in your home could result from several technical malfunctions, one of which is the furnace ignition control.

There is a potential that your relatively new furnace does not have a pilot light. It could instead be equipped with an electrical ignition system. Modern systems have a flame mechanism that restricts gas flow even when the heater is switched off.

  • The Absence Of Heat And Hot Water From The System

There will be times when your central heating system has problems, and when this occurs, it will not produce any heat. Before seeking the advice of a knowledgeable professional, you should attempt some of the easier solutions. First and foremost, ensure that your central heating system is activated.

A blown fuse has likely rendered your central heating inoperable, in which case you will need to fix it. If none of those above cause the problem, check the boiler to ensure that the pilot light is lit. It will likely need to be rekindled to produce heat if it has gone out. In the event where the issue is too challenging for you to solve on your own, contact Climate & Energy Solutions for heating installation solutions in Chico, CA.

  • Your Heating System Has An Unusual Or Burning Odor

You may detect a burning odor when you initially switch on your heater during the winter. The heating system eliminates dust and dirt accumulated since your last use. Another probable explanation for the odor is a dirty air filter; nevertheless, it may indicate a more serious problem.

Consider contacting a professional if the odor persists after the heating system switches off and is unplugged. After unplugging your air conditioner, remove any dust or grime that may have accumulated and, if necessary, replace the air filter.


Difficulty with the pilot light or the ignition control is one of the most common furnace problems. A good cleaning is sufficient to remedy an issue with the pilot’s lights. If not, maintenance and repairs are required.

In either situation, contacting a heating contractor, such as Climate & Energy Solutions, is advisable. We can also assist you with heating replacement in Chico, CA. Contact us today!